1. Commodity: SA/A312 N08904-904L super austenitic stainless steel pipe

2. Process method: cold finished

3. Surface finish: annealing, pickling and polishing as required

4. Material Grades:  N08904/904L, 1.4539, X1NiCrMoCu25-20-5

5. Specifications: SA/A312, EN10216-5, etc.

6. Size:

       A) NPS: 1/8" to 6"

       B) Schedule: 10S, 40/40S, 80/80S, 120, 160, XS, XXS      

       C) Length: Max. 25 meters

7. Packaging: seaworthy wooden case/plywood case/iron case/bundles packaging depending on products, destination, method of shipment and client requirement

8. Certificate: ISO 9001:2008, PED by LRQA, DNV, ASME by TUV

  

1. Commodity: SB/B677  N08904-904L super austenitic stainless steel pipe and tube

2. Process method: cold finished

3. Surface finish: annealing, pickling and polishing as required

4. Material Grades:  N08904/904L, 1.4539, X1NiCrMoCu25-20-5

5. Specifications: SB/B677, EN10216-5, etc.

6. Size:

       A) NPS: 1/8" to 6"

       B) Schedule: 10S, 40/40S, 80/80S, 120, 160, XS, XXS      

       C) Length: Max. 25 meters

7. Packaging: seaworthy wooden case/plywood case/iron case/bundles packaging depending on products, destination, method of shipment and client requirement

8. Certificate: ISO 9001:2008, PED by LRQA, DNV, ASME by TUV

 

1. Commodity: SA/A213 N08904/904L seamless super austenitic heat-exchanger, condenser tubes.

2. Process method: cold drawn/cold rolled.

3. Surface finish: annealing, pickling and polishing as required.

4. Material:  N08904/904L, 1.4539, X1NiCrMoCu25-20-5, with corresponding GB, ANSI, EN, JIS, BS & ISO material designations.

5. Specification: JIS G3463, EN10216-5, ASTM (ASME) A/SA 213/M & GB13296.

6. Size (astm/asme size as under, other standards of size is for ready choice)

a) O.D.: 1/2" to 3".

b) W.T.: 6 BWG, 8 BWG, 10 BWG, 12BWG, 14BWG, 16BWG, 18BWG, 20BWG, 22BWG.

7. Length: Max. 25 meters.

8. Applications: for boiler, superheater and heat-exchanger service.

9. Packing: plastic bags for each piece, then packed in seaworthy plywood case or wooden case or iron case.

10. Certificate: ISO 9001:2008, PED by LRQA, DNV, ASME by TUV

 

1. Commodity: EN10216-5 TC1/TC2 W. Nr. X1NiCrMoCu25-20-5/1.4539 seamless stainless steel tubes for pressure purposes

2. Process method: cold finished

3. Surface finish: annealing, pickling and polishing as required

4. Material Grades:  W. Nr. 1.4539, X1NiCrMoCu25-20-5

5. Specifications: EN10216-5, EN10297-2, etc.

6. Size:

       A) OD: 15 to 133mm

       B) WT: 0.7 to 10 mm

       C) Length: Max. 25 meters

7. Packaging: seaworthy wooden case/plywood case/iron case/bundles packaging depending on products, destination, method of shipment and client requirement

8. Certificate: ISO 9001:2008, PED by LRQA, DNV, ASME by TUV