1. Commodity: SA/A312 N08904-904L super austenitic stainless steel pipe
2. Process method: cold finished
3. Surface finish: annealing, pickling and polishing as required
4. Material Grades: N08904/904L, 1.4539, X1NiCrMoCu25-20-5
5. Specifications: SA/A312, EN10216-5, etc.
6. Size:
A) NPS: 1/8" to 6"
B) Schedule: 10S, 40/40S, 80/80S, 120, 160, XS, XXS
C) Length: Max. 25 meters
7. Packaging: seaworthy wooden case/plywood case/iron case/bundles packaging depending on products, destination, method of shipment and client requirement
8. Certificate: ISO 9001:2008, PED by LRQA, DNV, ASME by TUV
1. Commodity: SB/B677 N08904-904L super austenitic stainless steel pipe and tube
2. Process method: cold finished
3. Surface finish: annealing, pickling and polishing as required
4. Material Grades: N08904/904L, 1.4539, X1NiCrMoCu25-20-5
5. Specifications: SB/B677, EN10216-5, etc.
6. Size:
A) NPS: 1/8" to 6"
B) Schedule: 10S, 40/40S, 80/80S, 120, 160, XS, XXS
C) Length: Max. 25 meters
7. Packaging: seaworthy wooden case/plywood case/iron case/bundles packaging depending on products, destination, method of shipment and client requirement
8. Certificate: ISO 9001:2008, PED by LRQA, DNV, ASME by TUV
1. Commodity: SA/A213 N08904/904L seamless super austenitic heat-exchanger, condenser tubes.
2. Process method: cold drawn/cold rolled.
3. Surface finish: annealing, pickling and polishing as required.
4. Material: N08904/904L, 1.4539, X1NiCrMoCu25-20-5, with corresponding GB, ANSI, EN, JIS, BS & ISO material designations.
5. Specification: JIS G3463, EN10216-5, ASTM (ASME) A/SA 213/M & GB13296.
6. Size (astm/asme size as under, other standards of size is for ready choice)
a) O.D.: 1/2" to 3".
b) W.T.: 6 BWG, 8 BWG, 10 BWG, 12BWG, 14BWG, 16BWG, 18BWG, 20BWG, 22BWG.
7. Length: Max. 25 meters.
8. Applications: for boiler, superheater and heat-exchanger service.
9. Packing: plastic bags for each piece, then packed in seaworthy plywood case or wooden case or iron case.
10. Certificate: ISO 9001:2008, PED by LRQA, DNV, ASME by TUV
1. Commodity: EN10216-5 TC1/TC2 W. Nr. X1NiCrMoCu25-20-5/1.4539 seamless stainless steel tubes for pressure purposes
2. Process method: cold finished
3. Surface finish: annealing, pickling and polishing as required
4. Material Grades: W. Nr. 1.4539, X1NiCrMoCu25-20-5
5. Specifications: EN10216-5, EN10297-2, etc.
6. Size:
A) OD: 15 to 133mm
B) WT: 0.7 to 10 mm
C) Length: Max. 25 meters
7. Packaging: seaworthy wooden case/plywood case/iron case/bundles packaging depending on products, destination, method of shipment and client requirement
8. Certificate: ISO 9001:2008, PED by LRQA, DNV, ASME by TUV
